When a burner control screen fails, the plant usually isn’t far behind. Motion Engineering stocks EZAutomation and BCS touch screens for use with the BCS6000C and BCS7000 burner control systems, so you can get back up and running without delay.

These screens are not one-size-fits-all. Each unit is tied to a specific program and configuration, which means getting the right replacement matters.

Built for BCS6000C and BCS7000 Control Systems

These touch screens and CPUs are used in Honeywell Hauck burner control systems, commonly found in asphalt plants. They serve as the operator interface, allowing plant personnel to monitor and control the combustion process in real time.

Depending on the setup, these systems may include:

  • EZAutomation interfaces
  • AutomationDirect screens
  • Universal or version-specific programs
  • Mouse and non-mouse configurations

Because of these differences, matching the correct screen to your system is critical.

What These Screens Control

These touch screens are how operators interact with the burner system. From startup to shutdown, they provide direct control over key functions, including:

  • Monitoring burner status and operating conditions
  • Adjusting system parameters
  • Viewing alarms and fault messages
  • Managing ignition and shutdown sequences

If the screen is not working or is not matched correctly, it can limit visibility or prevent proper system operation.

EZAutomation & BCS Touch Screens In Stock & Ready to Ship

Motion Engineering keeps a range of BCS touch screens and CPUs in stock to help plants replace failed components quickly and avoid extended downtime.

The following part numbers are currently available:

BCS7000 Screens & CPU

  • 101031665 – BCS7000 10″ Touch Screen, EZAutomation, Standard Universal Program (Non-Mouse)
  • PRJ102001598 – BCS7000 10″ Touch Screen, AutomationDirect, Current BCS7000S Universal Program (Mouse)
  • 101031678 – BCS7000 CPU (programmable for mouse or non-mouse configurations)

BCS6000C EZAutomation Screens

  • PRJ101033814 – EZAutomation Screen with HK59999x025 Program
  • PRJ101030779 – EZAutomation Screen with HK59999x043 R2 & Earlier Program
  • PRJ101030780 – EZAutomation Screen with HK59999x043 Later than R2 (Universal Program)
  • PRJ101033437 – EZAutomation Screen with HK59999x045 Program
  • PRJ101030927 – EZAutomation Screen with HK59999x050 Program
  • PRJ101033443 – EZAutomation Screen with HK59999x052 Program

BCS6000C CPU

  • PRJ101033051 – BCS6000C CPU with HK59166X078 (Universal Program)

All listed units are in stock and ready for immediate shipment.

Getting the Right Screen the First Time

Burner control screens are not interchangeable across all systems. Differences in program versions, interface types, and hardware setups can cause issues if the wrong unit is installed.

Before replacing a screen, it is important to confirm:

  • The control system model (BCS6000C or BCS7000)
  • Program version and compatibility
  • Mouse vs non-mouse configuration
  • Existing CPU and system setup

Using the wrong screen can lead to communication problems or limited system functionality. Getting it right upfront avoids that risk.

Ongoing Support from Motion Engineering

If you are not sure which screen you need, we can help. Motion Engineering works with these control systems regularly and can review your setup to match the correct screen or CPU.

We focus on getting you the right part quickly so you can get the system back online without unnecessary delays.

Check Availability or Request Pricing Today

If your burner control screen has failed or is causing issues, Motion Engineering has EZAutomation and BCS touch screens in stock and ready to ship. Contact us to confirm availability, verify compatibility, or request pricing so you can get your system back up and running.